A 240 volt purpose-built air source, with a 2 metre flexible hose to connect to old or new IEC Air Tables or Air Tracks. Designed for low noise, a removable foam housing is fitted which further reduces noise. Electronic speed control optimises performance. A new product at a lower price than its predecessor. More Info (PDF 280KB).
LB0115-002 $238.90
For motion experiments in two dimensions. The Air Table has a working surface of 820x520mm which allows various circular pucks to float on an air cushion under almost frictionless conditions. A bumper surrounds the working area while a perimeter channel allows the fitting of various attachments. Overall surface 870x565mm. Requires an air source like the LB0115-002 (above). Contains: Air Table with carry handle; air inlet hose and elbow; centre pivot to allow cord to pass through the table; two small magnetic pucks; four small and four large pucks with load washers and elastic or non-elastic edges; foam filler pads; velcro bands; screws and pins for all pucks; angular acceleration attachment with pivot pin; four coil springs; adjustable feet; screws; nuts and elastic bands. More Info (PDF 330KB).
MF0150-001 $760.50
Air
Track - Brand New Version - IEC
An Air Track provides an air cushion allowing motion experiments to be easily and accurately performed with almost no frictional errors. An anodised aluminium air tube is generally supported on an optional sturdy sub-base. Kits with gliders, and numerous attachments are provided to cover a large range of experiments. Attachments and gliders relate to a special weight system, so that for many experiments a weighing balance is unnecessary. The various experimental parameters may be permanently recorded using the optional spark recording system or by using a strobe lamp and camera, (not supplied). With a comprehensive instruction book. Requires an air source like the LB0115-002 (above).
MF0107Z-001 $609.40 2 metre air track tube, complete with assembly and operation kits. More Info (PDF 743KB).
MF0105Z-001 $667.85 2.5 metre air track, complete with assembly and operation kits. More Info (PDF 772KB).
MF0107-001 $243.75 2 metre air track, air tube and end seals only. More Info (PDF 220KB).
MF0105-001 $302.25 2.5m air track, air tube and end seals only. More Info (PDF 220KB).
MF0107-401 $263.30 2 metre air track with air tube and end seals only, for spark recorder but without Spark Generator. More Info (PDF 414KB).
MF0105-401 $282.80 2.5 metre air track with air tube and end seals only, for spark recorder but without Spark Generator. More Info (PDF 411KB).
Assembly and operational kits:
MF0132-001 $107.25 assembly kit for all models, basic parts to set up the air track. More Info (PDF 311KB).
MF0133-001 $258.40 basic operation kit required for all models, containing gliders, springs, magnets etc. required for experiments More Info (PDF 310KB).
MF0136-101A $195 booster kit for all models, extra gliders, track divider, stop block, buffers etc. More Info (PDF 283KB).
Sub Bases:
MF0107-005 $165.75 2 metre optional sub base and 10 stud kit for straighter, rigid track. More Info (PDF 353KB).
MF0105-005 $190.10 2.5 metre optional sub base and 12 stud kit for straighter, rigid track. More Info, same as for MF0107-005.
Kit for photogate recording:
MF0138-001 $185.25 Two photogates, with cables, without timer. More Info (PDF 204KB).
Ancillary Equipment:
Air Source for Air Tables or Air Tracks, (see above), LB0115-002 $238.90
Photogate with self contained light source and photo detector, (more info), LB2336-001 $66.30
Timer-portable works with all types of photogates, (more info), LB4057-001 $187.20
Pictured: Air Track, Gliders, Air Source and Hose, kit parts etc.