Two versions of a tester that can measure: pH, Conductivity, TDS and Temperature, eliminating the need for separate meters. All pH/EC/TDS readings are automatically temperature compensated for. Large easy to read LCD with auto shut off. With replaceable pH electrode plus an extendable cloth junction to rejuvenate the pH electrode. The graphite conductivity electrode won’t get dirty from salt deposits. Auto shut off, battery indicator, adjustable TDS conversion factor and temperature coefficient, auto calibration, ‘hold’ function. Waterproof casing that also floats. Ranges:
EC: (conductivity) 0 to 3,999µS/cm, resolution 1µS/cm, accuracy +/- 2% F.S.
TDS: 0 to 2,000 ppm, resolution 1ppm, accuracy +/- 2% F.S.
pH: 0 to 14, resolution 0.01, accuracy +/- 0.05
Temperature: 0 to 60ºC, resolution 0.1ºC, accuracy +/- 0.5ºC
HI98129 $268.25 Combo Low
EC: (conductivity) 0 to 20mS/cm, resolution 0.01mS/cm, accuracy +/- 2% F.S.
TDS: 0 to 10ppt, resolution 0.01ppt, accuracy +/- 2% F.S.
pH: 0 to 14, resolution 0.01, accuracy +/- 0.01
Temperature: 0 to 60ºC, resolution 0.1ºC, accuracy +/- 0.5ºC
HI98130 $268.25 Combo High
A chemical test kit to analyse the most important environmental parameters: acidity, alkalinity, carbon dioxide, dissolved oxygen and hardness, which includes an electronic pHep® meter to test pH. Enough reagents for 100 or more tests of each parameter. Replacement reagents available. With full instructions and a hard carrying case.
HI3814 $370.20
A chemical test kit to analyse water quality. Chemical tests include: alkalinity, chloride, hardness, iron, and sulphite. Includes an electronic pHep® meter, sufficient reagents for 100 or more tests of each parameter except iron which has 50 tests. With instructions and a hard carrying case.
HI3817 $452.20
A rugged, waterproof and simple to use meter ideal for field use. Calibrate the low end with a zero oxygen solution while 100% calibration is done in air. The probe comes with a 4 metre cable and will read to an accuracy of 0.3 ppm in minutes. With auto temperature compensation and low battery indicator. With: probe, 2 spare membranes, electrolyte solution, 4 x AA batteries, instruction manual and carrying case. Two year warranty. Requires calibration solution.
Range: 0 to 19.9mg/L, resolution 0.1mg/L, accuracy +/- 1.5% full scale.
HI9142 $1106.10
Accessories / Spares:
HI7040L $30 zero oxygen calibration solution (460ml)
HI7041S $30 Oxygen electrolyte solution (30ml)
HI76407A/P $121.90 Pack of 5 replacement membranes
DiST6 a combination 3 in 1 tester for Conductivity, Total Dissolved Solids and Temperature. Features: a graphite electrode, adjustable TDS ratio and temperature coefficient, hold function, battery indicator, stability indicator, auto shut-off, auto calibration, all in a floating waterproof casing. With batteries and instructions. Calibration products are available separately. Ranges:
EC: (conductivity) 0 to 20 mS/cm, resolution 0.01mS/cm, accuracy +/- 2% Full Scale.
TDS: 0 to 10ppt, resolution 0.01ppt, accuracy +/- 2% F.S.
Temperature: 0 to 60ºC, resolution 0.1ºC, accuracy +/- 0.5ºC
HI98312 $195 DiST6
DiST5 as for DiST6 with different ranges:
EC: (conductivity) 0 to 3999µS/cm, resolution 1µS/cm, accuracy +/- 2% F.S.
TDS: 0 to 2,000ppm, resolution 1ppm, accuracy +/- 2% F.S.
HI98311 $195 DiST5
pH Testers - Hanna
With all of the best features like: multi line LCD to show pH and temperature, battery and stability indicator, replaceable pH electrode, automatic 1 or 2 point calibration (not screwdriver calibration), auto shut off, in a waterproof, floating case. With batteries and instructions. Temperature range: 0 to 60ºC.
HI98127 $166.20 pHep® 4, range: 0 to 14pH, resolution: 0.1, accuracy +/-0.1
HI98128 $188.40 pHep® 5, range: 0 to 14pH, resolution: 0.01, accuracy +/- 0.05
Checker® - pH Tester from Hanna
A low cost pH tester with an easily changed electrode. To change the electrode you simply unscrew the old one from the meter body and screw on the new one. Range 0 to 14pH accuracy +/-0.2, resolution 0.01pH. Runs on two, included, button cell batteries, battery life is approximately 5,000 hours. One or two point manual calibration. Dimensions: 66x50x25mm. Weight: 50 grams.
HI98103 $63
HI1270 $45 replacement electrode
With all of the best features like: multi line LCD to show pH and temperature, battery and stability indicator, replaceable pH electrode, automatic 1 or 2 point calibration (not screwdriver calibration), auto shut off, in a waterproof, floating case. With batteries and instructions. Temperature range: 0 to 60ºC.
HI98127 $166.20 pHep® 4, range: 0 to 14pH, resolution: 0.1, accuracy +/-0.1
HI98128 $188.40 pHep® 5, range: 0 to 14pH, resolution: 0.01, accuracy +/- 0.05
Checker® - pH Tester from Hanna
A low cost pH tester with an easily changed electrode. To change the electrode you simply unscrew the old one from the meter body and screw on the new one. Range 0 to 14pH accuracy +/-0.2, resolution 0.01pH. Runs on two, included, button cell batteries, battery life is approximately 5,000 hours. One or two point manual calibration. Dimensions: 66x50x25mm. Weight: 50 grams.
HI98103 $63
HI1270 $45 replacement electrode
