35 results found for 'Clamp'. | View 25 per page
Low relevance matches: 25 other results may be of interest to you. Show low relevance matches
35 results found for 'Clamp'. | View 25 per page
Low relevance matches: 25 other results may be of interest to you. Show low relevance matches
Vernier Go Direct Sensor Clamp
VERNIER GO DIRECT SENSOR CLAMP
Vernier's Go Direct Sensor Clamp securely fastens to a wand-style Vernier Go Direct sensor and the included lanyard works as a strap to prevent accidental drops during investigations in the field.
Relax knowing students won’t drop their s...
Order code: GDX-CLAMP
Vernier Plastic Tubing Clamp (Pack of 100)
VERNIER PLASTIC TUBING CLAMPS
These easy-to-use clamps are great for providing an airtight fit for transpiration experiments.
Order code: PTC
Vernier Motion Detector Clamp
VERNIER MOTION DETECTOR CLAMP
The Motion Detector Clamp screws into the back of the Motion Detector and then it can be clamped to a variety of objects such as table tops, ring stands etc.
Order code: MD-CLAMP
Vernier Rod Clamp
VERNIER ROD CLAMP
The Vernier Rod Clamp is used to attach one end of a Vernier Dynamics Track to a vertical ring stand rod. This configuration is most often used to create a ramp.
Order code: RC-VDS
IEC Pulley Vertical Adjustable with Universal Bench Clamp
IEC VERTICAL PULLEY WITH BENCH CLAMP
A very strong, low friction 50mm diameter pulley mounted on a strong 200mm rod that is held by a very useful universal bench clamp. The pulley and rod are clamped into position so that the pulley runs in the vertical plane. The bench c...
Order code: MF2593-001
IEC Clamp Safety for Gas Syringe 100ml
IEC SAFETY CLAMP FOR GAS SYRINGES
A simple safety device for holding a gas syringe, supporting the body and the
plunger to prevent the plunger from extending beyond a certain point. Gas syringes are fragile and expensive and this clamp reduces breakages, reduces experime...
Order code: CH0860-001
IEC Clamp Bench Alloy Universal for 13mm Maximum Rods
IEC UNIVERSAL BENCH CLAMP FOR UP TO 13mm RODS
The IEC designed alloy Universal Bench Clamp can fit to benches up to 40mm thick and, when clamped, can carry rods up to 13mm diameter both vertically and horizontally.
The clamp is complete with large steel knurled head kno...
Order code: LB0858-001
Clamp Burette Polypropylene Double
A double polypropylene burette clamp with spring loaded clamps to hold the burettes. Supplied with two inserts to allow use with retort stand diameters of about 9.5mm to 13.5mm.
Order code: LW1637-01
Retort Clamp Alloy with Cork Lined Jaws
This is the best made Retort Clamp that we have seen. Made of die-cast alloy with tight tolerances on all pivot points to ensure that jaws close without fouling each other. The design incorporates a mechanical stop that prevents the jaws from being overtightened and possibly br...
Order code: LW1667-01
IEC Pulley 50mm Diameter with Clamp Screw
IEC BENCH MOUNTING PULLEY
A 50mm diameter high quality nylon pulley mounted on a strong aluminium frame for clamping to a bench top or similar flat surface to a maximum 25mm thickness. The side of the pulley clamps parallel to the surface of the bench. The clamp screw has...
Order code: MF2590-001
Pulley - Aluminium - 70mm Diameter - Vertically Mounted on a G Clamp
A 70mm diameter aluminium pulley mounted vertically on a G-Clamp. Can be clamped to a bench or table up to approximately 35mm thick.
Order code: MS0358-01
IEC Dissectible Transformer Iron Core Clamp
IEC DISSECTIBLE TRANSFORMER IRON CORE CLAMP
A replacement clamp moulded from GFN with moulded-in steel pin to fit the 35x35mm 'U' iron cores as included in the EM1660-001 IEC Dissectible Transformer Kit.
Does not fit the old 40x40mm 'U' cores.
Order code: PA1660-008
IEC Ripple Tank Clamp Screw for Leg with Wing Nut
IEC RIPPLE TANK CLAMP SCREW FOR LEG WITH WING NUT
A clamp screw with wing nut and cupped washer for the leg of the SW3430-001 IEC Ripple Tank.
The stainless steel legs are held to the moulded plastic frame by these aluminium clamp screws. The leg passes through the clam...
Order code: PA3430-010
IEC Ripple Tank Support Bar Clamp Collar & Screw
IEC RIPPLE TANK SUPPORT BAR CLAMP COLLAR AND SCREW
A replacement clamp collar and screw for the PA3430-006 stainless steel bar that supports the variable speed rippler of the SW3430-001 IEC Ripple Tank
Order code: PA3430-016
Vernier Go Direct Drop Counter
VERNIER GO DIRECT DROP COUNTER
Vernier's Go Direct Drop Counter precisely records the number of drops of titrant added during a titration and then automatically converts it to volume. It directly connects wirelessly via Bluetooth® or wired via USB to your platform.
Con...
Order code: GDX-DC
Vernier Motion Detector
VERNIER MOTION DETECTOR
Vernier's Motion Detector uses ultrasound to measure the position, velocity and acceleration of moving objects from as close as 15cm and as far away as 6m. The pivoting head allows flexibility in setting up experiments.
The sensor attaches easil...
Order code: MD-BTD
Vernier Electrode Support
VERNIER ELECTRODE SUPPORT
Vernier's Electrode Support is a great complement to the Vernier Stir Station, as well as a perfect holder for many sensors. It is built to connect to all standard ring-stand posts and its large-handled locking nut keeps your sensors firmly in pl...
Order code: ESUP
Vernier Drop Counter
VERNIER DROP COUNTER
The Drop Counter precisely records the number of drops of titrant added during a titration, which is automatically converted into volume. It may be used in conjunction with other sensors, such as a pH Sensor, Conductivity Probe or ORP Sensor to perfor...
Order code: VDC-BTD
Vernier Force Table Adapter
VERNIER FORCE TABLE ADAPTOR
The Vernier Force Table Adapter extends the versatility of your Vernier Dual-Range Force Sensor and Vernier Go Direct Force and Acceleration Sensor by increasing the mounting possibilities. It is specifically designed to attach to a round force...
Order code: FTA-DFS
IEC Recording Timer and Kit 8 to 12V AC 50 Dots
IEC RECORDING TIMER KIT 8-12V AC 50 DOTS/SEC
The IEC recording timer is almost indestructible with a heavy diecast base and rubber feet that allow the device to vibrate at 50Hz without the need to clamp it to the bench. An extension rod from the base can be clamped to a r...
Order code: LB2670-001
IEC Dissectible Transformer Set
IEC DISSECTIBLE TRANSFORMER KIT
The IEC Dissectible Transformer can be assembled in many ways to produce a solenoid, magnet, choke, spot welder, induction heater and transformer.
The large iron core has a section of 35x35mm and the 'I' is clamped to the 'U' to close th...
Order code: EM1660-001
IEC Inclinometer Clinometer Simple
IEC INCLINOMETER OR CLINOMETER
The IEC Inclinometer, sometimes called a clinometer, is a simple and self-contained device for measuring the angle of incline or decline from the observer to an object. The observer looks through the viewing tube and places the object in the...
Order code: LB1950-001
IEC Recording Timer DC 12V Electronic 25/50Hz Frequency
IEC RECORDING TIMER DC 12V ELECTRONIC 25/50Hz
The IEC two speed (25 and 50Hz) DC Recording Timer is very similar to the LB2670-001 IEC AC Recording timer but generates the 25 and 50Hz electronically from an AC or DC source or 12V AC or DC PlugPak. A slide switch selects t...
Order code: LB2671-005
IEC Collision In 2 Dimensions Kit
IEC COLLISION IN 2 DIMENSIONS KIT
This simple device clamps to a bench and allows balls of different mass to collide at angles to calculate the laws of dynamics and mass. The point that the balls reach the floor is shown by carbon paper leaving a mark. A plumb bob from be...
Order code: MF1000-001
IEC Inertial Balance Kit PSSC
IEC INERTIAL BALANCE KIT
The IEC Inertial Balance Kit is a simple demonstration of the principle of determining the mass of an object from the frequency at which it vibrates in a system. In addition it clarifies the difference between mass and weight.
Gravity pulling eve...
Order code: MF1964-001
IEC Pulley 50mm Diameter on Rod
IEC 50mm NYLON PULLEY ON ALLOY ROD
A 50mm diameter nylon pulley fixed to the end of an 8mm diameter straight aluminium anodised rod 200mm long. Use with the LB0858-001 IEC Universal Bench Clamp or a retort stand and boss head.
The rod supporting the pulley is straight i...
Order code: MF2600-001
IEC Pulley 50mm Diameter Nylon on Alloy Rod Offset
IEC OFFSET 50mm NYLON PULLEY ON ALLOY ROD
A 50mm diameter nylon pulley fixed to the end of an 8mm diameter aluminium anodised rod 200mm long. Use with the LB0858-001 IEC Universal Bench Clamp or a retort stand and boss head.
The rod supporting the pulley is bent in one ...
Order code: MF2600-020
IEC Ripple Tank Support Bar Stainless Steel for Ripple Maker
IEC RIPPLE TANK STAINLESS STEEL RIPPLER SUPPORT BAR
A stainless steel support bar for the variable speed rippler (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-006
IEC Ripple Tank Support Bar for Illuminator
IEC RIPPLE TANK STAINLESS STEEL SUPPORT BAR FOR ILLUMINATOR
A stainless steel bar to support the PA3430-013 illuminator (not including clamp collars) of the SW3430-001 IEC Ripple Tank.
Order code: PA3430-015
IEC Vibrator for Strings Meldes App 4-8V AC
MELDE'S APPARATUS - VIBRATOR FOR STRINGS
This compact and robust instrument is used for the lateral vibration of a cord at 50Hz or 60Hz frequency for experiments in standing waves and resonance. It can be free standing, clamped to a bench or supported horizontally or vert...
Order code: SW4220-001
Boss Head - Die Cast Aluminium Alloy with Plastic Head Clamping Screws
Bosshead, die-cast aluminium, takes up to 19mm diameter rod.
Order code: SC7340
Boss Head - Die Cast Aluminium Alloy with Metal Head Clamping Screws
Die-cast aluminium bosshead, takes up to 24mm diameter rod.
Overall length with clamps fully extended: 180mm
Width: 40mm
Order code: SC7345
Test Tube Holder - Brass Prongs on Wooden Handle - Pack of 10
Brass test tube holders with a wooden handle, can hold test tubes from 15-32 mm diameter. Overall length is 225mm. Safer than other types especially when handling hot test tubes around open flames.
Pack of 10 Holders.
Order code: SC14296
IEC Spectrum Tube Spring Clip for Support Rod
IEC SPECTRUM TUBE SUPPORT ROD SPRING CLIP
A replacement spring clip to fit the support rod of HL3785-001 IEC Spectrum Lamp Power Supply.
Order code: PA3785-017
35 results found for 'Clamp'. | View 25 per page