594 results found for 'vernier'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24 | Next | View 100 per page
Low relevance matches: 49 other results may be of interest to you. Show low relevance matches
594 results found for 'vernier'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24 | Next | View 100 per page
Low relevance matches: 49 other results may be of interest to you. Show low relevance matches

Vernier Photogate Bar Tape Kit
VERNIER PHOTOGATE BAR TAPE
The Photogate Bar Tape Kit contains a flexible plastic tape called "Bar Tape" and a guide that allows the tape to be used with a Vernier Photogate. The tape is 3 m long, and it has alternating opaque and transparent bars that have a spacing of 1...
Order code: TAPE-VPG

Vernier LabPro / WDSS / DCU / Stir Power Supply
VERNIER LABPRO, WIRELESS DYNAMIC SENSOR SYSTEMS,DIGITAL CONTROL UNIT AND STIR STATION POWER SUPPLY
This 6 volt, DC, centre tip negative, 600 mA mains adapter (plugpack) is used with the Vernier:
LabPro
Wireless Dynamics Sensor System
Digital Control Unit,
Stir Statio...
Order code: PSLP-INT

Vernier Air Track Adaptor
VERNIER AIR TRACK ADAPTER
The Vernier Air Track Adapter allows the Vernier Dual-Range Force Sensor or Vernier Go Direct Force and Acceleration Sensor to be mounted on the end of an air track for collision studies.
The adapter is compatible with most air tracks distrib...
Order code: ATA-DFS

Vernier Force Table Adapter
VERNIER FORCE TABLE ADAPTOR
The Vernier Force Table Adapter extends the versatility of your Vernier Dual-Range Force Sensor and Vernier Go Direct Force and Acceleration Sensor by increasing the mounting possibilities. It is specifically designed to attach to a round force...
Order code: FTA-DFS

Vernier Laser Pointer Stand
VERNIER LASER POINTER STAND
This lightweight tripod is a perfect support for the Vernier Laser Pointer or any other laser pointer which has a 1.1 cm outside diameter.
A pair of clips attached to the pivoting bracket securely holds the laser in place. The stand allows y...
Order code: STAND

Vernier Mini USB Cable
VERNIER USB MINI CABLE
This is a replacement mini USB cable. The cable has a USB mini B plug and USB standard A plug.
This cable is included with the following interfaces:
• LabQuest 2
• LabQuest Stream™
• LabQuest Mini
• Original LabQuest (no longer sold)
• Go Di...
Order code: CB-USB-MINI

Vernier LabPro to USB Cable
VERNIER LABPRO TO USB CABLE
This is the standard 1 meter USB cable used for connecting LabPro or a SensorDAQ to a computer. It can also be used to connect Ocean Optics, SpectroVis or SpectroVis Plus spectrometer to either a computer or a LabQuest.
Order code: CB-USB

Vernier Go!Motion to Computer Cable
VERNIER GO!MOTION TO COMPUTER CABLE
This cable is used to connect a Go!Motion or CBR 2 to a computer. It is included with Go!Motion.
Order code: GMC-USB

Vernier Analog Protoboard Connector
VERNIER ANALOGUE PROTOBOARD CONNECTOR
Vernier's analogue protoboard connector makes it easy to wire the signal from a Vernier analogue sensor into a non-Vernier interface.
The connector fits into a standard prototyping board or National Instruments’ ELVIS prototyping b...
Order code: BTA-ELV

Vernier Digital Protoboard Connector
VERNIER DIGITAL PROTOBOARD CONNECTOR
Vernier's digital protoboard connector makes it easy to wire the signal from a Vernier digital sensor into a non-Vernier interface.
The connector fits into a standard prototyping board or National Instruments’ ELVIS prototyping boar...
Order code: BTD-ELV

Vernier Analogue Sensor Extension Cable
VERNIER ANALOGUE SENSOR EXTENSION CABLE
Most of Vernier's sensors have cables that are 1.5m long. There are times, however, when you may need a longer cable. The Vernier Analogue Sensor Extension Cable is 2m long and can be used with any Vernier sensor that connects to an...
Order code: EXT-BTA

Vernier Digital Sensor Extension Cable
VERNIER DIGITAL SENSOR EXTENSION CABLE
For the times when a BTD Vernier digital sensor requires a longer cable than the standard 1.5m, this extension cable adds another 2 metres.
The Vernier Digital Extension Cable can be used with any Vernier sensor that connects to ...
Order code: EXT-BTD

Vernier Cable for Sound Level Meter
VERNIER CABLE FOR SOUND LEVEL METER
Replacement cable for Vernier Sound Level Meter.
Order code: CB-SLM

Vernier Analogue Breadboard Cable
VERNIER ANALOGUE BREADBOARD CABLE
Vernier's Analogue Breadboard Cable provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition.
One end of the cable is a standard British Telecom Analogue (...
Order code: BB-BTA

Vernier Digital Breadboard Adaptor
VERNIER DIGITAL BREADBOARD CABLE
The Breadboard Cable (Digital) provides an easy way for students to build their own sensor circuitry and input the signal into a Vernier interface for data acquisition.
One end of the cable is a standard British Telecom Digital (BTD) co...
Order code: BB-BTD

Vernier DIN Sensor to BTA Input Adaptor
VERNIER DIN SENSOR TO BTA INPUT ADAPTOR
This adaptor allows you to connect old DIN style sensors to LabPro, Go!Link, CBL 2 and LabQuest. One end has a female 5-pin DIN connector. The other end is a male BTA connector.
Order code: DIN-BTA

Vernier Analogue BTA Cable
VERNIER ANALOGUE BTA CABLE
This 1.5m cable can be used to connect your homemade analogue sensors to Vernier interfaces. There is a BTA plug on one end and six bare wires on the other end.
You will need to use a multimeter and test for continuity to determine which wir...
Order code: CB-BTA

Vernier Digital BTD Cable
VERNIER DIGITAL BTD CABLE
This 1m cable can be used to connect your homemade digital sensors to Vernier interfaces. There is a BTD plug on one end and six bare wires on the other end.
You will need to use a multimeter and test for continuity to determine which wire go...
Order code: CB-BTD

Vernier Digital Sensor Cable
VERNIER DIGITAL SENSOR CABLE
This cable connects Vernier digital sensors to the digital (DIG) port on Vernier's LabQuest 2, LabQuest Original or LabQuest Mini interface.
The Vernier Digital Sensor Cable is included with the Vernier Motion Detector and Vernier Drop Count...
Order code: MDC-BTD

Vernier BT Photogate Cable
VERNIER BT PHOTOGATE CABLE
A replacement cable for the one supplied with each Vernier Photogate to connect it with Vernier interfaces.
Order code: PG-BTD

Vernier Radiation Monitor to BTD Input Adapter
VERNIER RADIATION MONITOR TO BTD INPUT ADAPTOR CABLE
BTD Radiation Cable.
Order code: RAD-BTD

Vernier Rotary Motion Sensor to BTD Input Adapter
VERNIER ROTARY MOTION SENSOR TO BTD INOUT ADAPTOR
This adaptor allows a Rotary Motion Sensor to be connected to the BTD port of a LabPro or CBL 2.
Order code: ROT-BTD

Vernier Mini-to-Standard USB Adapter
VERNIER MINI-TO-STANDARD USB ADAPTOR
This adapter allows an EasyTemp or EasyLink to be connected to a computer for data collection using Logger Pro or Logger Lite software. The adaptor has a USB Mini-A receptacle that connects to the EasyTemp or EasyLink and a standard-A ...
Order code: MINI-USB

Vernier Standard-to-Mini USB Adaptor
VERNIER STANDARD TO MINI USB ADAPTOR
This adaptor allows a Go!Temp or Go!Link* to connect to the USB port of a TI-84 graphing calculator. The adaptor has a USB standard-A receptacle which connects to the Go!Temp or Go!Link and a USB Mini-A USB plug that connects to the ca...
Order code: USB-MINI

Vernier Centripetal Force Apparatus Replacement Sliding Carriage
VERNIER CENTRIPETAL FORCE APPARATUS REPLACEMENT SLIDING CARRIAGE
A replacement sliding carriage for the Vernier Centripetal Force Apparatus.
Order code: SC-CFA
594 results found for 'vernier'. Prev |1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|24 | Next | View 100 per page