VERNIER SPARKFUN REDBOARD WITH CABLE
The SparkFun RedBoard is an Arduino-compatible board that is perfect for use with the Vernier Arduino Interface Shield. It is a surface-mount board which is pin-for-pin compatible with a R3 3 Arduino layout. The key difference between the RedBoard and most Arduino boards is that it uses a mini-B USB connector instead of a full-size type-B USB connector.

The RedBoard operating voltage is 5 volts which is required for use with most Vernier sensors. You can power the RedBoard either with the USB connector (included) or with a 7-15V barrel jack power supply (not included).

To use Vernier sensors with the SparkFun Redboard you will need the Vernier Arduino Interface Shield. See Vernier's full guide on how to use Vernier sensors with Arduino View >>>>

Specifications:
• Dimensions: 68.58 x 53.34mm
• USB-to-Serial Chip: FTDI FT232RL
• Main Processor: ATmega328
• Flash Memory: 32kB
• Clock Speed: 16MHz
• Operating Voltage: 5 volts
• Digital I/O Pins: 14 (6 PWM outputs)
• Analog Inputs: 6
• Button: Reset
• USB Connector: USB Mini-B cable (included)
• Barrel jack power connector: 5 mm, with 2.1 mm centre pole (centre pole +, 7 to 15 V supply)

Included:
• SparkFun RedBoard with cable
• Mini-B USB cable (1.5 m long)

Educational use only:
Vernier and Kidwind products are designed for educational use. They are not appropriate for industrial, medical or commercial applications. Details

• Warranty: 1 year limited warranty

  ---

  Dimensions
  • Package size (HxWxD): 57 x 89 x 178mm
  • Packed weight: 110g

    Last edited 23rd Jan 2024

    Works with:	From
    BT-ARD - Vernier Arduino Interface Shield	$70.00

    Documents:
    Catalogue	Vernier Catalogue K-12
    Catalogue	Vernier Catalogue Uni

    
    Note: Prices do NOT include GST or freight